140x140

Intelligent Movement

SMARTWASH 5000 Cart Washer

The SMARTWASH 5000 is Automation Dynamics' automated conveyor feed cart washer. The double structure includes a conveyor feeder, a clean & sanitize unit, and a dryer unit.

Automated system allows for a complete clean, sanitize, and dry.

About Technical Info

140x140
140x140


About the SMARTWASH 5000

The SMARTWASH 5000 has a conveyor cart feed system that moves the carts through two sanitizer modules. The first module has the spinner chemical and washing nozzles where the cart is washed and the sanitizer chemical is applied. The second module is the dryer area, which allows a cart to be dried at the same time another cart is being washed and sanitized.

Pumping Plants

The SMARTWASH Pumping Plant comes as a separate unit offering adaptability for installation. The pumping plant can be placed in remote areas when space constraints dictate. Three different sizes of pumping plant stations can be purchased with the SMARTWASH models:

  • Model A (Basic) - This model is used for basic sanitizing. 2 HP pump/motor with rotating nozzles and a water flow rate of 15 GPM, pumping unit holding tank with by pass valve, glycerin filled pressure gauge, piping grid for nozzles located inside the washing area, stainless steel high pressure connecting hoses.
  • Model B (High Power) - This model is used for high power cleaning. Sanitize and wash is included with this pump station. 5 HP pump/motor with rotating nozzles and a water flow rate of 25 GPM, pumping unit holding tank with by pass valve, glycerin filled pressure gauge, piping grid for nozzles located inside the washing area, stainless steel high pressure connecting hoses.
  • Model C (Intense Clean) - This model is the largest pumping station that we sell. Giving your carts an intense clean with sanitizes and wash cycles. Ideal usage is any bio-hazardous materials, bodily fluids, and human excrements. 10 HP pump/motor with rotating nozzles and a water flow rate of 35 GPM, pumping unit holding tank with by pass valve, glycerin filled pressure gauge, piping grid for nozzles located inside the washing area, stainless steel high pressure connecting hoses.

Controls

  • Control Option A - Programmable Logic Controller, Manual on/off start switch, this controller has one wash profile and is not-adjustable.
  • Control Option B - Programmable Logic Controller, Manual on/off start switch, with a 3-way selector switch for a choice of 3 wash profiles. This controller is non-adjustable.
  • Control Option C - Interactive Control System with Programmable Logic Controller, Manual on/off start switch, including an interactive touch screen offering 5 wash profiles. This controller is totally interactive allowing wash options to be built on command on site and saved as a wash profile for auto selection.


Technical Specifications

Dimensions:

  • Sanitizer Single Structure - 7' 6" H x 8' 4" L x 7' 6" W"
  • Door Opening 6' 5" H x 4' W

3 Phase Electrical Requirements (110 Volt 50 Amp 60Hz):

  • 3 Sizes of Pumping Plants to choose from: 2 HP, 5 HP, 10 HP
  • Wash 208-230/460
  • Dryer 10 HP 208-230/460 46.5/21
  • Control Panel Dedicated 120 Volt 20 Amp
  • Water (based on choice of Pumping Plant) 180° Water Max - 40 GPM 60 PSI Minimum
  • Air 1/4" Line 80 PSI less than 5 cubic feet

Options Included

  • Automatic Doors
  • 120 MPH Blow Dryer
  • Building Bottom with Water Drain Pit
  • Auto Load
  • Auto Unload
  • Instant Kill
  • AD Dryer Building Module